Tips For Safe Tree Felling

Tree Felling is the process of cutting down trees, and it requires specialized knowledge to ensure that the job is done safely. It can be used for a number of purposes, such as clearing land for development, harvesting timber, or even removing unhealthy and unsafe trees. It is important to use the correct techniques when felling a tree, as the wrong approach could result in property damage or serious injury or even death for yourself or others. In this article, we will look at some tips that can help you safely perform Tree Felling.

Before you begin, it is important to prepare the area where you will be felling the tree. This will include ensuring that people are a safe distance away from the fall path, as well as ensuring that you have all the necessary tools and equipment. You should also clear the surrounding area of any potential hazards, such as power lines or buildings. Finally, it is a good idea to wear protective gear, such as safety glasses and hearing protection, while working on the project.

The first step in tree felling is to create an undercut on the side of the trunk toward which it will fall. This can be accomplished by making a cut on each side of the trunk, or a single cut that runs vertically through the center of the trunk. It is important to make this cut as close to the ground as possible and to place it above any swelling on the stump.

Next, you will create the notch cut, which is the opening through which the tree will fall. This cut should be placed at a point that is about 1/3 of the diameter of the tree at its tallest point. Once this is complete, it is important to ensure that the notch is positioned correctly in relation to the direction of the lean of the tree.

Once the notch is in place, you will need to saw the felling cut. This should be made about 5 cm higher than the notch cut. This will create a hinge effect that will control the direction in which the tree falls.

It is important to saw as evenly as possible across the width of the felling cut, so that it is as flat as possible. This will help to ensure that the tree is not pulled sideways as it falls, which can cause damage to other nearby plants and structures.

If you want to avoid any unnecessary damage, it is best to use a chainsaw with a large blade when sawing the felling cut. This will help to prevent the blade from catching and causing the wood to split apart. It is also important to maintain a steady hand while sawing the felling cut, as mistakes can be fatal.

As with any woodworking project, it is important to assess the situation before you begin. Take into account the factors that will affect the outcome of your work, including the wind direction and strength, slope, and any other major obstacles.

source https://realtreesolutions.wordpress.com/2024/09/14/tips-for-safe-tree-felling-2/